bannermap Home Page
Sedona logo Arborpic
sedona unit

With a natural appearance and earthy color blends, Keystone Sedona Stone will blend with any landscape. Lightweight and easy to handle, Sedona Stone is perfect for your do-it-yourself project. Its secure, interlocking design makes installation as easy as 1-2-3! No special tools are required. Also known as Lodgestone in certain areas of the country, Keystone Sedona Stone will make your next retaining wall project easy.

Keystone Sedona Stone
is also known as Lodgestone
in certain areas of the country.










sedona logo
specifications tri-plane
height 3"
width 8"
depth 5.25"
weight 8lbs

Product size, weight, color and product
availability varies by location.
Please contact your local manufacture
for up to date product information.

sedona section sedona radius


sedona logo

Use this guide for estimating the number of Keystone Sedona Stone™ units required.

WALL LENGTH (measured at wall face including curves)
5' 10' 15' 20' 25' 30'
3" (1 course) 8 15 23 30 38 45
6" (2 courses) 16 30 46 60 76 90
9" (3 courses) 24 45 69 90 114 135
12" (4 courses) 32 60 92 120 152 180

Please Note:
Maximum wall height not to exceed 12". This chart is based on site conditions
which include a leve grade, granular soil and no surcharge. Contact Keystone
Retaining Wall Systems for design options on wall heights exceeding 12".


Sedona Logo
arbor step 1 arbor step 2 arbor step 3
STEP 1 | Prepare the site. STEP 2 | Set the base course. STEP 3 | Stack and fill.
Start by digging a shallow trench 4" deep by 12" wide. Cut through and remove any sod, roots or large rocks. For organic loam soils, dig 4" deeper and add a leveling pad of sand or gravel. Compact and level the soil to receive the first course of Keystone Sedona Stone™. Place and level the first Keystone Sedona Stone™ unit. Level each additional unit on the base course as you place it, making sure that the outside edges touch. If your wall contains both straight and curved areas, start with a straight area and build into the curves. Complete the base course before proceeding to the second course. Starting with straight areas first, begin placing the second course. Center each Keystone Sedona Stone™ unit on the seams of the course below in a running bond
pattern as shown. Now proceed to the next layer, backfilling as you go. For drainage behind the wall, clean gravel or crushed stone is recommended.
arbor lug removal Remove Edges
To remove outside lugs or edges of retaining lip, hold unit securely or place at angle on ground. Strike the lug firmly with a hammer. Cutting the units may also be necessary to keep the them on bond. Always wear safety glasses to protect eyes from chips.