bannermap home page
  • 360° VIEW
Palazzo logo

Palazzo pic

Palazzo unit

Featuring an attractive antique finish and earthy color blends, Keystone Palazzo Stone™ is a natural choice for adding beauty to your home or garden. Angled on both ends and finished on two sides, Palazzo Stone offers two unique face sizes on a single unit system allowing you to create a random look design from one pallet. Palazzo Stone is the perfect choice for small freestanding walls, parapet walls, curves and planters, as well as traditional retaining wall applications.

  **Limited Availability: Check with your local Keystone representative for product availability in your area.



Palazzo logo
  unit specifications
height 4"
width 12/9"
depth 8"
weight 25lbs
pins yes

Product size, weight, color and product availability varies by location. Please contact your local manufacture for up to date product information.

palazzo unit
palazzo vertical section palazzo setback section
Shown vertical Shown with setback

Use this guide for estimating the number of Keystone Palazzo Stone units required.

WALL LENGTH (measured at wall face including curves)
5' 10' 15' 20' 25' 30'
4" (1 course) 6 12 18 24 30 36
8" (2 courses) 12 24 36 48 60 72
12" (3 courses) 18 36 54 72 90 108
16" (4 courses) 24 48 72 96 120 144
20" (5 courses) 30 60 90 120 150 180
24" (6 courses) 36 72 108 144 180 216

  Maximum wall height vertical position   Maximum wall height setback position
  • Maximum wall height not to exceed 24".The maximum height is based on a level grade, total granular soil,wall built in setback position, and no surcharge. Contact your local Keystone representative for design options on wall heights exceeding 24" or supporting surcharges and backslope.
  • Change in color on chart denotes maximum wall height for vertical and setback positions.
  • Keystone recommends cap units as the top course and/or caps of freestanding walls secured with Keystone KapSeal™ adhesive.
Palazzo logo
step 1 step 2 step 3
STEP ONE | Prepare the site STEP TWO | Set Base Course STEP THREE | Pin, Stack & Fill
Start by digging a shallow trench 8" deep by 16" wide. Cut through and remove any sod, roots or large rocks. Place 4" leveling pad of compacted sand or gravel in the trench to receive the first course of Keystone Palazzo Stone. Place and level the first Palazzo Stone unit. Level each additional unit on the base course as you place it, making sure that the outside edges touch. If your wall contains both straight and curved areas, start with a straight area and build into the curves. Complete the base course before proceeding to the second course.

*Note: For straight line walls, unit faces can be alternated to create a more random look.
Starting with straight areas first, begin placing the second course. Center each Keystone Palazzo Stone unit over the pins on the joints of the course below in a running bond pattern as shown.Now proceed to the next layer, backfilling as you go. For drainage between units and behind the wall, clean gravel or crushed stone is recommended.
Palazzo logo